Sennheiser S1 NOISEGARD, User Manual

Page: 19 / 32

Using the S1 DIGITAL
18 | S1 DIGITAL
Adjusting the microphone sensitivity
The microphone sensitivity has been factory preset to 35 mV/Pa.
왘
Use a slotted screwdriver to adjust the microphone sensitivity.
Remote-controlling connected Bluetooth devices
You can directly remote-control any Bluetooth device supporting the
AVRCP profile and connected to the S1 DIGITAL by using the buttons on the
headset. Please refer to the instruction manual of your audio source for
information on whether your
Bluetooth device supports the AVRCP profile.
Adjusting the volume for connected devices
왘
Use the Volume button and the Volume button to adjust the vol-
ume of your connected Bluetooth device. When the minimum or maxi-
mum volume is reached, you hear an acknowledgement tone.
WARNING
Danger of hearing damage!
Listening at high volume levels for long periods can lead to perma-
nent hearing defects.
왘
Before putting the headset on, set the volume to a low level.
왘
Do not continuously expose yourself to high volumes.
Button Duration Function
Incrementally increases the volume
Incrementally reduces the volume
Continuously increases the volume
Continuously reduces the volume
1 s
1 s