Sennheiser S1 NOISEGARD, User Manual

Page: 23 / 32

Cleaning/maintaining the S1 DIGITAL
22 | S1 DIGITAL
Cleaning/maintaining the S1 DIGITAL
왘
Before cleaning, pull out the plugs of the product from the connections
in the aircraft.
왘
Use a soft, slightly damp cloth or a cloth dampened with mild, soapy
water to clean the product.
Replacing the headband padding, ear pads and wind
screen
For reasons of hygiene, you should replace the headband padding, the ear
pads and the wind screen from time to time. Spare parts are available from
your Sennheiser partner.
Replacing the headband padding
1 Slightly lift the headband padding and carefully remove it from the holder.
2 Slide the new headband padding into the holder.
Replacing the ear pads
1 Grasp the edge of the ear pad and peel it up and away from the ear cup.
2 Slide the new ear pad onto the ear cup.
Replacing the wind screen
1 Pull the wind screen from the microphone.
2 Carefully slide the new wind screen over the microphone.
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a short-circuit and
damage the electronics.
왘
Keep all liquids far away from the product.
왘
Do not use any solvents or cleansing agents.
1 2
2
1
1 2
1 2