![background image](http://html.mh-extra.com/html/sennheiser/pxc-550/pxc-550_instruction-manual_1240988019.webp)
PXC 550
| 17
Getting started
Pairing the headphones with a Bluetooth device using NFC
Ensure that the headphones and the
Bluetooth
switch are in the “on” position
when performing this procedure.
1.
Activate the NFC function on your smartphone.
2.
Lightly tap the smartphone to the panel on the left
ear cup
of the headphones.
Once the connection is established, you hear the voice prompts
“pairing”,
and the
5
-LED-array repeatedly flashes white in a running display. The
headphones are in pairing mode.
At this point, if you decide to not proceed with the pairing, just press the
Sound button once. You will hear the voice prompt
“pairing cancelled”
after a few seconds.
3.
Click
“Yes”
if a pairing confirmation dialog appears on the screen of your
smartphone (this step may vary depending on your smartphone).
If pairing is successful, you hear the voice prompt
“connected”
and an LED
flashes white 3 times.
Menu
NFC off
› power on ‹
› pairing ‹
Menu
NFC on
NFC off
Connect to Bluetooth device?
Yes
No
› connected ‹
3X
Left
L
TAP!
I
f no connection is established, you hear the voice prompt “no connection”.
After attempting to connect for 5 minutes, pairing mode is terminated and
the headphones return to the disconnected state.
Switch the headphones
off and repeat the pairing procedure.
Summary of Contents for PXC 550
Page 1: ...PXC 550 Wireless headphones Instruction Manual ...
Page 2: ...2 PXC 550 ...
Page 53: ...PXC 550 51 Content ...