manualshive.com logo in svg

Sennheiser PXC 550, Instruction Manual

Share
Download
Sennheiser PXC 550 Instruction Manual Download Page 24

22 | 

PXC 550

Getting started

Connecting an iPhone using the USB connection cable

In order to connect an iPhone to the PXC 550 using the USB connection cable

, you 

require a USB adapter for iPhone (Lightning or 30-pin connector; available from 
your specialist dealer).

 

X

Connect the USB connection cable to the USB socket of the PXC 550. Then use 
the USB adapter to connect the USB cable to your iPhone.

Adjusting the headband

For good sound quality and best possible wearing comfort, you can adjust the 
ear pad location on the headband to properly match the size of your head. 

 

X

Wear the headphones so that the headband runs over the top of your head.

 

X

Adjust the location of the ear pads by moving the ear cups up and down of 
the headband slider until:

 

– your ears are comfortably covered by the ear pads,

 

– you feel even, gentle pressure around your ears,

 

– a snug fit of the headband on the head is ensured.

Summary of Contents for PXC 550























































Reviews:

No comments

Brands by name

Popular brands

Load more brands