manualshive.com logo in svg

Sennheiser PXC 550, Instruction Manual

Share
Download
Sennheiser PXC 550 Instruction Manual Download Page 46

44 | 

PXC 550

Care and maintenance

Resetting to default factory settings

CAUTION

Loss of all settings!

If you reset the PXC 550 to the factory default settings, all of your personal 
settings will be deleted.

 

X

If necessary, write down your settings in order to be able to recreate them 
after the reset.

In order to reset the PXC 550 to the factory default settings, you require the 
Sennheiser “CapTune” app.

 

X

Connect the PXC 550 via 

Bluetooth

 to the device which has the Sennheiser 

“CapTune” app installed (see page 16).

 

X

In the app, tap on “PXC 550”.
The settings of the PXC 550 are displayed.

 

X

Tap on “Factory Reset” and confirm the confirmation prompt.
The PXC 550 is reset to the factory default settings, which causes all active 

Bluetooth

 connections to be lost. The PXC 550 restarts.

 

X

Connect the devices again, if necessary (see page 16).

PXC 550

Factory Reset

CapTune

Summary of Contents for PXC 550























































Reviews:

No comments

Brands by name

Popular brands

Load more brands