Sennheiser PXC 310 BT, Quick Manual

Page: 28 / 44

Putting the PXC 310 BT into operation
14
Connecting the audio cable
Connecting the audio cable
You can connect the headphones to the audio source using the audio cable
if
• you do not want to use the Bluetooth function,
• you are not allowed to use the Bluetooth function (some airlines do not
allow Bluetooth transmission)
or
• the battery pack is flat.
If the headphones are already connected to the audio source via
the
Bluetooth interface, the Bluetooth connection is automatically
disconnected when you connect the audio cable. The Star LED
햲
flashes
3 times red and you hear a descending beep.
왘
Connect the 2.5 mm jack plug of the audio cable to the socket
쐏
of the
headphones.
왘
Connect the 3.5 mm jack plug of the audio cable
쐉
to
– the headphone socket of your audio source or
– the audio adapter for 6.35 mm jack socket
씈
if the 3.5 mm jack plug
of the audio cable is too small or
– the in-flight adapter
씉
if you want to use the headphones with an
in-flight entertainment system.
When the audio cable is connected to your audio source, you hear the
sound from your audio source and the
Star LED
햲
flashes blue.
Detaching the audio cable
If you want to use the headphones only as Bluetooth headphones or as
passive hearing protectors, you can detach the audio cable
쐉
.
왘
Pull the 2.5 mm jack plug of the audio cable
쐉
from the socket
쐏
of
the headphones.
When the audio cable is connected to the headphones, the
Bluetooth function cannot be switched on.
1
쐉
씈
씉
1
When detaching the audio cable, the Bluetooth function is
not automatically switched on.
왘
Switch the Bluetooth function on again (see “Switching
the Bluetooth function on/off” on page 18).