Sennheiser PXC 310 BT, Quick Manual

Page: 33 / 44

19
Using the PXC 310 BT
Remote-controlling connected devices from the
headphones
You can directly remote-control any device supporting the AVRCP profile
and connected to the PXC 310 BT by using the buttons on the headphones.
Please refer to the instruction manual of your audio source for information
on whether your device supports the AVRCP profile.
If your device does not support the AVRCP profile, you can use an optional
dongle. Using the iPod dongle or the USB dongle, you can remote-control
the connected devices from the headphones.
Remote-controlling the audio source from the headphones
If your headphones have a Bluetooth connection to an audio source (e.g.
iPod, MP3 or CD player), you can use the PXC 310 BT to remote-control the
audio source as follows:
Resetting the settings of the headphones
You can reset the volume and connection settings of your headphones to
the original settings. This allows you to prevent that other users of the
headphones can access your
Bluetooth enabled devices. You can then pair
5 new devices with the headphones.
왘
Press the Master button
햶
and keep it pressed until the Star LED
햲
flashes 3 times red. The headphones switch off (see “Switching the
headphones off” on page 16).
왘
Press the Master button
햶
and keep it pressed until the Star LED
햲
alternately flashes blue and red.
왘
Press the Bluetooth button
쐄
and keep it pressed until the settings of
the headphones are reset.
Button Duration Function Button Duration Function
Incrementally
increases the
volume Incrementally
reduces the
volume
Continuously
increases the
volume Continuously
reduces the
volume
Skips to the
next track Skips to the
previous track
Fast-forwards
the track Rewinds the
track
Plays and
repeats the
track Stops the track
(acknowledge-
ment tone)
1 s 1 s
1 s 1 s
1 s
5
1
5
1
2s
5s
���