Sennheiser PXC 310 BT, Quick Manual

Page: 30 / 44

Using the PXC 310 BT
16
Using the PXC 310 BT
Switching the headphones on/off
Switching the headphones on
왘
Press the Master button
햶
and keep it pressed until the Star LED
햲
flashes blue. You hear an ascending beep.
– When switching the headphones on for the first time , they will
automatically go into pairing mode.
The headphones are waiting to be paired with a
Bluetooth enabled
device (see page 11).
– When the headphones are already paired with an audio source , the
Bluetooth connection is automatically established.
You hear an ascending beep and then your audio source.
– When the headphones are already paired with an audio source but
the audio source is switched off or out of range, the Star LED
햲
flashes blue.
The headphones will try for 3 minutes to connect to one of the
5 known audio sources. If this fails, the headphones automatically
switch off.
Switching the headphones off
왘
Press the Master button
햶
and keep it pressed until the Star LED
햲
flashes 3 times red.
You hear a descending beep. The
Bluetooth connection is automatically
deactivated. The headphones switch off.
CAUTION! Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to
permanent hearing defects. Please protect your hearing.
Sennheiser headphones also sound exceptionally good at low
volumes.
왘
Set the volume to a medium level.
5
1
5
1