![background image](http://html1.mh-extra.com/html/sennheiser/mobileconnect-mcs-v1/mobileconnect-mcs-v1_user-manual_1242846008.webp)
8
MobileConnect User Guide
Version 1.0
Step 4. Install the MobileConnect Station
There are two versions of MobileConnect Station (MCS) hardware:
MCS v1
MCS v2
•
Connect your MCS to the network
o
Use
LAN2
(MCS v1) or
PoE/Stream
(MCS v2) port to connect your streaming network.
o
Use
LAN3
(MCS v1) or
Ctrl
(MCS v2) port optionally to connect a second network for
configuration. If you don't wish to use a separate network, and the port is not connected, the
system will use the streaming network for control as well.
o
Note:
The network ports use DHCP by default. To configure a static IP:
§
Configure your PC with the static IP address 192.168.0.2, netmask: 255.255.255.0
§
Connect the
LAN1
or
Ctrl
port directly to your PC
§
Open your browser and navigate to 192.168.0.10 to open the local admin interface
§
You can configure the network and a static IP address using the local admin interface
In order to use a MCS v1, you need to upgrade its firmware. For details, see section
Upgrading a legacy MobileConnect Station
.