MKH 20...70
04/2005
Test instructions
Measuring and test equipment
1 AF generator, output voltage 1V
1 AF voltmeter, 10mV range
1 oscilloscope
1 handheld multimeter, range 2V
DC
1 capacitance meter, 0 to 100pF
1 ohmmeter, range 20M
Ω
1 headphones
Measuring set-up
Test procedure
Circuit test MKH20/MKH30/MKH40/MKH50:
쐃
Operating voltage microphone:
Check voltages between R22 or R23 and ground; desired value = +41V;
both voltages have to be identical.
If the no-load voltage of the phantom supply device is not 48V, the deviation
from the desired value has to be identical.
쐇
Current consumption microphone:
Check voltages via R20 and R21; desired value in each case = 3.3V
(corresponds to a current of 1mA in each case);
both voltages have to be identical.
쐋
Balancing:
Check the voltage between the measuring points A(+) and B(-);
desired value = 0V
If the value is not 0V, rotate the coil core of L1 until the voltage is 0V.
쐏
Operating voltages output stage:
Check voltage via D6; desired value = 9V
Check voltage via D8; desired value = 8V
쐄
Operating voltage oscillator:
Check voltage via C4; desired value = +28.5V
Device
under test
phantom
supply
amplifier
48 V
oscilloscope
voltmeter
headphones
Summary of Contents for MKH 20
