MKE 1
The smallest Sennheiser clip-on microphone
The microphone capsule
The microphone capsule features an overmold which only serves as an
anti-kink sleeve. The microphone capsule itself is protected from mois-
ture.
Cleaning after use
Remove the frequency response cap from the microphone capsule.
왘
Hold the microphone by the cable and
not
by the anti-kink sleeve.
Shake the microphone capsule to remove excess moisture.
왘
Bathe the microphone capsule in distilled water to loosen make-up
왘
residues and other soiling.
Do
왘
not
use a cloth or a bristle brush to clean the microphone sound
inlet.
Dry the microphone for approx. 12 hours. The microphone sound inlet
왘
has to point downwards during drying.
12 h
The cable
The anti-kink sleeve on the connector and the microphone is desig-
ned to meet the highest requirements in quality. The use of additional
adhesive tapes or shrink-on tubes can damage the material and reduce
the service life of the cable.
Only use lavalier tape (LAV-Tape) to attach the
왘
cable to the skin. Lavalier tape is available as an
original Sennheiser accessory.
Cleaning after use
Use a cloth a
왘
fine
bristle brush and isopropyl
alcohol to remove make-up residues or other
soiling.
Special cleaning for the MKE 1 M variants
Only use distilled water and a slightly damp cloth to clean
왘
the cable.
Do
왘
not
use any solvents such as isopropyl alcohol, as these
can damage the surface.
