![background image](http://html1.mh-extra.com/html/sennheiser/hme-110/hme-110_instruction-manual_1240665038.webp)
If a problem occurs ...
16 |
HME 110
If a problem occurs ...
Problem
You are using a stereo
audio system but the
headset is set to mono
operation.
Set the mono/stereo
switch to “
STEREO
”
(see page 9).
You are receiving a
mono source but the
headset is set to stereo
operation.
Set the mono/stereo
switch to “
MONO
”
(see page 9).
Very low
volume
communication
The volume is set too
low.
Adjust the volume
setting of your
headset
(see page 10).
The headphone
connection has been
pulled out.
Check to see if the
headphone jack plug
is correctly connected.
Reduced
intelligibility
The microphone
connection has been
pulled out.
Check to see if the
microphone jack plug
is correctly connected.
Microphone
output voltage
too high or too
low
The microphone gain
“Mic Gain” needs to be
readjusted.
Adjust the
microphone gain
“Mic Gain” until you
have reached the
desired setting
(see page 11).
Possible cause
Solution
HME110_547018_0112_SP3.book Seite 16 Dienstag, 29. April 2014 10:03 10
Communication
is in one ear only