Sennheiser ew 300 IEM G3, Instructions For Use Manual

Page: 80 / 185

33
Stereo/mono selection (transmitter only)
Mode
Via the “ Mode ” menu, you can switch the transmitter between mono and
stereo operation.
Note:
Connect any unit that only delivers a mono signal to the transmitter’s left
XLR-3F socket
and set the transmitter to mono operation. The receiver
automatically “identifies” the transmitted audio signal and does not need
to be set to mono operation. However, you have to deactivate the pilot
tone evaluation on the receiver.
Activating/deactivating the lock mode
LOCK
Lock
Via the “ Lock ” menu, you can activate or deactivate the lock mode.
The lock mode icon on the display indicates that the lock mode is activated.
To deactivate the lock mode, first press the SET button. Then press the /
rocker button to select “LOC.OFF”. If you confirm your selection by pressing
the
SET button, the buttons can be operated as usual.
Exiting the operating menu
EXIT
Exit
Via the “ Exit ” menu, you can exit the operating menu and return to the
standard display.
SR 300 IEM G2/SR 350 IEM G2
EK 300 IEM G2
ew300_350_IEM_INT.book Seite 33 Freitag, 7. März 2008 8:55 08