Sennheiser ew 300 IEM G3, Instructions For Use Manual

Page: 61 / 185

14
The antenna mounts consist of:
y
2 BNC extension cables (screw-in BNC socket to BNC connector )
y
2 washers
y
2 nuts
y
2 antenna holders (GA 3030 AM only)
y
4 screws (GA 3030 AM only)
To front mount the antenna of the SR 300 IEM G2 transmitter :
Screw the BNC socket of the BNC extension cables to the blanking plate
using the supplied washer and nut.
Connect the BNC connector to the BNC socket on the transmitter.
Slide the transmitter into the 19’’ rack.
Secure the rack mount “ears” to the rack.
Connect the telescopic antenna to the BNC socket .
Pull the end cap to extend the telescopic antenna .
To front mount the antennas of the SR 350 IEM G2 twin transmitter :
Unsecure the rack mount “ears” from the rack.
Guide the BNC cables through the holes in the rack mount “ears” as shown
in the diagram on the left.
Screw the antenna holders to the BNC sockets using the supplied
washers and nuts.
Secure the antenna holders to the handles of the twin transmitter using
two of the supplied screws respectively.
ew300_350_IEM_INT.book Seite 14 Freitag, 7. März 2008 8:55 08