Sennheiser ew 300 IEM G3, Instructions For Use Manual

Page: 66 / 185

19
Adjusting the volume
You can adjust the volume at the headphone output on both the transmitter
and the receiver.
Use the volume control or to adjust the volume of the connected
headphones.
Adjusting the balance
During stereo operation – and provided that the standard display is shown
on the display panel – the
/ rocker button serves to adjust the balance
between the left and right stereo signal .
During FOCUS operation, the / rocker button serves to adjust the
relative levels of the two separate channels in the mixed mono signal (see
“Stereo/FOCUS selection (receiver only)” on page 30).
Activating/deactivating the lock mode
Transmitter and receiver have a lock mode that can be activated or
deactivated via the operating menu (see “Activating/deactivating the lock
mode” on page 33). The lock mode prevents that
y
the transmitter is accidentally programmed or switched off during
operation,
y
the balance setting is accidentally changed via the receiver’s / rocker
button.
Attaching the receiver to clothing
The receiver is attached to clothing (e.g. belt, waistband) with the supplied
belt clip.
CAUTION! Danger of hearing damage!
Listening at high volume levels for long periods can lead to
permanent hearing defects.
Set the volume for the connected headphones to the
minimum before putting the headphones on.
SR 300 IEM G2/SR 350 IEM G2
EK 300 IEM G2
ew300_350_IEM_INT.book Seite 19 Freitag, 7. März 2008 8:55 08