![background image](http://html1.mh-extra.com/html/sennheiser/em-300-g3-01-09/em-300-g3-01-09_instruction-manual_1241698018.webp)
17
Synchronizing the plug-on transmitter with a receiver
Synchronizing the plug-on transmitter
with a receiver
When synchronizing the plug-on transmitter with a receiver, please
observe the following:
Synchronizing the plug-on transmitter with the
receiver – individual operation
Upon delivery, the plug-on transmitter and the receiver are synchronized
with each other. If, however, you cannot establish a transmission link
between plug-on transmitter and receiver, you have to synchronize the
channels of the devices.
For information on automatic synchronization of the plug-on transmitter
with the receiver (individual operation), refer to the instruction manual of
the receiver. This information is marked with the
icon.
Alternatively, you can set the channel on the plug-on transmitter
manually:
왘
Make sure that you set the plug-on transmitter to the same frequency
bank and the same channel as the receiver (see page 13).
If you still cannot establish a transmission link, refer to the chapter “If a
problem occurs ...” on page 19.
Synchronizing plug-on transmitters with receivers –
multi-channel operation
Combined with ew 100 G3 receivers, ew 100 G3 plug-on transmitters can
form transmission links that can be used in multi-channel systems.
For information on automatic synchronization of plug-on transmitters
with receivers (multi-channel operation), refer to the instruction manual
of your receiver.
For more information on multi-channel operation, visit the SKP 100 G3
product page at www.sennheiser.com.
왘
Only use a plug-on transmitter and a receiver from the same
frequency range (see the type plates on the transmitter and
the receiver).
왘
Make sure that the desired frequencies are listed in the
enclosed frequency information sheet.
왘
Make sure that the desired frequencies are approved and legal
in your country and, if necessary, apply for an operating
license.
Summary of Contents for EM 300 G3 - 01-09
Page 1: ...SKP 100 Instruction manual...