![background image](http://html1.mh-extra.com/html/sennheiser/em-300-g3-01-09/em-300-g3-01-09_instruction-manual_1241698014.webp)
13
Adjusting settings via the operating menu
Adjusting settings via the operating
menu
The main menu “
Menu
”
Adjusting the input sensitivity – “Sensitivity”
Adjustment range: 0 to
–48 dB, adjustable in steps of 6 dB
Selecting the frequency bank and the channel manually –
“Frequency Preset”
Make use of the possibility to adjust settings via the operating
menu of your receiver and to transfer these settings to the plug-
on transmitter.
For more information, refer to the instruction manual of the
receiver. The relevant information is marked with the sync icon.
The audio level display “
AF
”
햲
always indicates the audio level,
even if the plug-on transmitter is muted, e.g. allowing you to
check the adjusted sensitivity before live operation.
Input sensitivity
adjusted ...
Effect/display
... too high
Close talking distances, speakers with loud voices or
loud music passages cause overmodulation in the
transmission link.
The audio level display “
AF
”
햲
shows full deflection
for the duration of the overmodulation.
... correctly
The audio level display “
AF
”
햲
shows full deflection
only during the loudest passages.
... too low
The transmission link is undermodulated. This
results in a signal with high background noise.
Adjust a low input sensitivity when using condenser microphones,
adjust a high input sensitivity when using dynamic microphones.
When you are in the “
Frequency Preset
” menu item, the RF signal
is deactivated.
Menu
–12 dB
S e n s i t i v i t y
– 12
dB
S e n s i t i v i t y
–36
dB
S e n s i t i v i t y
“Stored”
Call up
“Sensitivity”
Select the desired
setting
Store the setting
SET
SET
MHz
533.875
B.Ch: 20.12
MUTE
P
AF
햲
Menu
B.Ch: 5.12
Frequency Preset
B.Ch:
792.525MHz
Frequency Preset
5
.12
B.Ch:
Frequency Preset
1.
12
“Stored”
818.850MHz
SET
SET
Call up “Frequency
Preset”
Select the frequency
bank and confirm
Select the channel;
store the setting
SET
Summary of Contents for EM 300 G3 - 01-09
Page 1: ...SKP 100 Instruction manual...