Sennheiser EK 500 G4 Instruction Manual Download Page 92

Page: 92 / 132

Using the SK 500 G4

Advanced > Tune menu item

•

Configuring the transmission frequency and frequency bank U

When you have configured the bodypack transmitter to a system bank and
you call up the

Tune

menu item, channel 1 of the frequency bank

is auto-

matically set. The message

U.1

briefly appears in the display. In the factory

settings, the channels of the frequency bank

are not assigned to any

transmission frequency.

While you work in the

Tune

menu, the RF signal is deactivated.

You can configure a transmission frequency for the current channel or se-
lect a channel in the frequency bank

and configure a transmission fre-

quency for this channel in the

Tune

menu. Be sure to note the information

on frequency selection, see “Setting notes”.

Only adjusting the frequency

To configure the transmission frequency for the current channel:

▷

Open the

Tune

menu item in the

Advanced

menu.

The frequency selection appears.

►

▷

Configure the desired frequency.

▷

Press the

SET

button.

Your settings will be saved. You are now back in the operating menu.

Setting the channel and frequency

To select a

channel

and assign it a frequency:

▷

Open the

Tune

menu item in the

Advanced

menu by pressing and hold-

ing the

SET

button until the frequency bank selection appears.

►

▷

Set the desired channel.

▷

Press the

SET

button.

The frequency selection appears.

▷

Configure the frequency.

Summary of Contents for EK 500 G4





































































































































Search results

Summary of Contents for EK 500 G4

Reviews:

Related manuals for EK 500 G4

Brands by name

Popular brands

Sennheiser EK 500 G4, Instruction Manual

Search results

Summary of Contents for EK 500 G4

Reviews:

Related manuals for EK 500 G4

Brands by name

Popular brands