Sennheiser EK 500 G4 Instruction Manual Download Page 75

Page: 75 / 132

Using the SKM 500 G4

Advanced > Tune menu item

•

Configuring the transmission frequency and frequency bank U

When you have configured the wireless microphone to a system bank and
you call up the

Tune

menu item, channel 1 of the frequency bank

is auto-

matically set. The message

U.1

briefly appears in the display. In the factory

settings, the channels of the frequency bank U are not assigned to any
transmission frequency.

While you work in the

Tune

menu, the RF signal is deactivated.

You can configure a transmission frequency for the current channel or se-
lect a channel in the frequency bank U and configure a transmission fre-
quency for this channel in the

Tune

menu. Be sure to note the information

on frequency selection, see “Setting notes”.

Only adjusting the frequency

To configure the transmission frequency for the current channel:

▷

Move the multi-function switch until the

Tune

menu item appears.

▷

Press the multi-function switch.

The frequency selection appears.

►

▷

Configure the desired frequency.

▷

Press the multi-function switch.

Your settings will be saved. You are now back in the operating menu.

Setting the channel and frequency

To select a channel and assign it a frequency:

▷

Move the multi-function switch until the Tune menu item appears.

▷

Hold down the multi-function switch until the frequency bank selection
appears.

►

▷

Set the desired channel.

▷

Press the multi-function switch.

The frequency selection appears.

▷

Configure the frequency.

Summary of Contents for EK 500 G4





































































































































Search results

Summary of Contents for EK 500 G4

Reviews:

Related manuals for EK 500 G4

Brands by name

Popular brands

Sennheiser EK 500 G4, Instruction Manual

Search results

Summary of Contents for EK 500 G4

Reviews:

Related manuals for EK 500 G4

Brands by name

Popular brands