Installing the SKM 500 G4
25
Installing the SKM 500 G4
These sections contain detailed information about installing and starting
up the SKM 500 G4.
You can find information about operating the SKM 500 G4 under “Using the
SKM 500 G4”.
Inserting and removing the batteries/rechargeable
batteries
You can operate the wireless microphone either with batteries (AA, 1.5 V)
or with the rechargeable Sennheiser BA 2015 battery.
▷
Screw the rear part of the wireless microphone in the direction of the
arrow (counter-clockwise) off of the handle of the wireless microphone.
When you remove the wireless microphone during operation, mute is
automatically activated.
MUTE
appears in the display panel. When
you screw the microphone back together, mute is deactivated.
▷
Pull the rear part of the wireless microphone all the way out.
▷
Open the cover of the battery compartment.
▷
Place the batteries or the BA 2015 rechargeable battery in the battery
compartment as shown on the cover. Please observe correct polarity
when inserting the batteries/accupack.
▷
Close the cover.
▷
Push the battery compartment into the handle of the wireless micro-
phone.
▷
Screw the rear part of the wireless microphone back onto the handle.