Sennheiser EK 500 G4 Instruction Manual Download Page 61

Page: 61 / 132

Using the EK 500 G4

Advanced -> Sync Settings menu item

In the

Sync Settings

menu item of the

Advanced

submenu, you can con-

figure the parameters to be sent to the transmitters and activate or deac-
tivate transmission The parameters are defined separately for the SK, SKM
and SKP.

You can activate/deactivate the following parameters:

•

Sensitivity

•

Auto Lock

•

Mute Mode

•

RF Power

•

Phantom Power 48 V (only SKP 500 G4)

To configure a parameter and activate or deactivate transmission:

▷

Go to the parameter in question in the

Advanced -> Sync Settings

menu.

▷

Press the

SET

button to open the sub-item.

▷

Press the

and

DOWN

buttons to set the value.

▷

Press the

SET

button to save the setting.

▷

Press the

and

DOWN

buttons to activate or deactivate the check

box.

When the check box is activated, the value will be transmitted during
synchronization. If it is deactivated, the value will not be transmitted.

▷

Press the

SET

button to save the setting.

Summary of Contents for EK 500 G4





































































































































Search results

Summary of Contents for EK 500 G4

Reviews:

Related manuals for EK 500 G4

Brands by name

Popular brands

Sennheiser EK 500 G4, Instruction Manual

Search results

Summary of Contents for EK 500 G4

Reviews:

Related manuals for EK 500 G4

Brands by name

Popular brands