Advanced settings
22
왘
Press the program key
on the master mobile unit
and keep it pressed for four seconds.
The master mobile unit starts beeping in a high
tone three times a second, thus indicating
conference initialization mode.
왘
Within one minute after the last mobile unit was
placed into the docking station:
Place a mobile unit into the
right-hand
charging
slot of the docking station.
The mobile unit starts beeping the same way as the
master mobile unit, indicating that the mobile unit
has joined the intercom conference.
왘
For larger intercom conferences:
Repeat the last step for up to four mobile units.
왘
Press the program key
on the master mobile unit
and keep it pressed for four seconds.
All mobile units stop beeping. The conference
initialization mode is ended.
Note:
The conference initialization mode ends auto-
matically one minute after the last mobile unit is
placed into a charging slot or the maximum number
of participating mobile units is reached.
왘
Take the master mobile unit out of the
left-hand
charging slot of the docking station and connect a
headset.
The voices of all participants are now audible.
Summary of Contents for DW 800
Page 1: ...Instructions for use DW 800...
Page 28: ......