Sennheiser DW 800, Instructions For Use Manual, Page: 21 / 28

Advanced settings
23
Ending the intercom mode
To make a mobile unit leave intercom:
왘
Press the hook key on the corresponding mobile
unit.
The remaining mobile units continue to inter-
communicate.
Note:
Once a mobile unit leaves an intercom conference,
re-entry is impossible. The whole intercom
conference has to be set up again from the
beginning.
To end intercom for all mobile units simultaneously:
왘
Press the hook key on the master mobile unit.
Note:
When intercom is ended, the corresponding mobile
units automatically return to the operating status
they had before intercom started.
It is not possible to re-enter intercom once it has
been exited.
Pairing mobile units
Upon delivery, the two mobile units of a set are
already paired, i.e. they automatically recognize each
other and do not interfere with other wireless systems
used in the vicinity. You do
not have to pair the two
mobile units.
If you switch off a mobile unit and switch it on again,
the mobile units of a paired set automatically
recognize each other.
However, if you have to exchange one of the two
mobile units of a set for a new one, e.g. because it is