![background image](http://html.mh-extra.com/html/trust/bt220/bt220_manual_1176819001.webp)
BT220 HEADSET
1
UK
Product information
1
Charge
connection
2
“+”
button
3
“-”
button
4
Function indicator (blue)
5
Battery indicator (red)
6
Ear
plug
7
Microphone
8
Ear
clip
9
Charge indicator (red)
10
Power indicator (green)
Installation
1
FULLY
charge before use! 2 ~ 4 hours.
Batteries full: red charge indicator (9) will go out.
2
Activate the
pairing
mode: press
‘+’ button for 8 seconds
Æ
blue + red
indicators
will flash
alternately
3
To make a telephone call:
activate
Bluetooth and
search
for Bluetooth devices (the headset must still
be flashing for it to be detectable).
4
Bluetooth device(s) found: select “
Trust
BT220
”.
5
PIN code =
1234
.
It may be possible to enter or alter the name of the headset.
Press
Connect
.
6
Place the headset on your ear (either the left or right ear).
7
To answer an incoming call: press the “+” button.
8
Adjust the volume. Other functions: see the table.
9
To end a telephone call: press the “-“ button for 3 seconds.
General method for pairing the headset with another Bluetooth (BT) device
Headset
Other Bluetooth device
1. Activate
the
pairing
mode:
(Press “+” button for 8 sec.)
2.
Search for new BT devices.
3.
Headset found.
4.
Select/activate the headset.
5.
Enter the PIN code (1234).
6.
The connection will be created.
7.
(Sometimes you will have to press the “+” button to activate the connection.)
8.
To disconnect: press the “+” button for 3 sec.