Sennheiser ADN, Instruction Manual

Page: 68 / 121

67
Using the “Conference Manager” software
Eliminating connection problems
If no connection to the central unit can be established or if the configuration cannot
be found, an error message appears.
왘
Check if the central unit is correctly connected
*
(see page 50) and switched on
(see page 20).
왘
If necessary, disconnect an existing connection to the central unit in order to
establish a new connection (see next section).
왘
Click “ Retry ”.
Disconnecting the connection to the central unit
왘
In the menu bar, click “ Global Menu ” > “ Disconnect ”.
A confirmation prompt appears.
왘
Click “ OK ”.
The connection to the central unit is disconnected. If necessary, the software
changes to “Setup” operating mode.
Creating a new configuration
왘
In the menu bar, click “ Global Menu ” > “ New Conference Document ”.
The “ Open ” window appears.
왘
Select the “ New Conference Document ” option button.
왘
Click “ OK ”.
A new configuration is created. The software changes to “Setup” operating
mode and the Room View window is displayed (see page 60).
* only if you are using the Windows version of the software