Sennheiser ADN, Instruction Manual, Page: 103 / 121

Using the “Conference Manager” software
102
To change the speaking time limit:
왘
In the “ Talk Time ” box, enter the desired speaking time limit into the drop-
down list field (see also page 91).
Changing the conference mode
왘
From the “ Mode ” drop-down list in the “ Conference ” box, select the desired
conference mode (see page 90).
Changing the maximum number of
speakers who can take
the floor simultaneously
왘
From the “ Open ” drop-down list in the “ Conference ” box, select the maximum
number of speakers who can take the floor simultaneously (see also page 91).
Changing the maximum number of
requests to speak
왘
Change the maximum number of requests to speak (see page 91).
Changing the behavior of the
signal light ring when a
request to speak is made
왘
Change the behavior of the signal light ring when a request to speak is
made (see page 91).
Exiting the “Live” operating mode
You can exit the “Live” operating mode by calling up the “Setup” operating mode:
왘
Click the “ Setup ” button.
The “ Stop ” warning message appears.
왘
Click “ OK ”.
The software switches to “Setup” operating mode and the View windows
change their appearance accordingly. A running conference is
not interrupted.
Using the log and diagnosis function – “ Event Log “
The log and diagnosis function allows you to log all changes to the conference
system. As soon as a change to the system or an error is detected, the
button
on the toolbar changes to .
To start the “ Event Log ” function:
왘
Click the button on the toolbar.
Or, if the “ Processing ” window is displayed: