Charging the ADN-W BA
6 |
ADN-W BA
For optimum performance, durability and maintenance of the
ADN-W BA battery pack, please observe the following:
•
You can immediately use the ADN-W BA battery pack (bat-
tery capacity of approx. 30 % upon delivery). You only have to
recharge the battery pack when the battery charge is low. An
initialization charge is not necessary.
•
You can charge the battery pack at any time and for as
long as you want. A complete charge cycle (100 %) is not
necessary.
•
You do not have to regularly deep-discharge the battery pack
to reach an optimum battery life cycle.
•
If the displayed remaining operating time of the battery pack
significantly differs from the actual operating time, you can
re-calibrate the operating time display. To do so, completely
discharge the battery pack and then fully recharge it again
(100%).
•
After charging, the battery pack can remain in the charger.
The intelligent charging electronics monitors the charging
process and prevents incorrect battery charging.
•
When not using the wireless conference unit for extended
periods of time, remove the battery pack from the device.
Cover the contacts to avoid short circuits.
•
When storing the battery pack for extended periods of time,
charge it to approx. 50% of capacity.
•
Only store the battery pack within the specified storage tem-
perature range (see page 9).
ADN-W_BA_1212_EN.fm Seite 6 Freitag, 4. April 2014 6:10 18
