Inserting/removing the ADN-W BA
4 |
ADN-W BA
Over view of the status LEDs
The charge status display
consists of 5 LEDs and can be called up by
pressing the button
. During charging, the LEDs show the obtained
capacity.
Inserting/removing the ADN-W BA
To
insert
the
ADN-W BA battery pack into the wireless conference unit:
왘
Check the battery pack before using it in order to ensure sufficient
battery capacity and to exclude a defective battery pack (see
page 8).
왘
Charge the battery pack if necessary (see page 5).
왘
Slide the battery pack into the battery guide rails
of the wireless
conference unit.
The battery release clip
locks into place with an audible click and
secures the battery pack.
1 2
Status LEDs
Color
Meaning
Battery status
indicator
–
Battery capacity 5-100%
orange, flashing slowly
Battery capacity < 5%,
battery pack is almost flat
orange, flashing rapidly Battery pack is defective
RF status
indicator
–
Good transmission quality
blue, flashing slowly
Transmission quality is
temporarily reduced
blue, flashing rapidly
Transmission quality is
permanently reduced
1
2
1 2 3 4 5
5
6
LED
Color
Remaining capacity
Remaining operating time
1
red
approx. 0 - 19 %
approx. 0 - 4 hours
2
orange
approx. 20 - 39 %
approx. 4 - 8 hours
3
orange
approx. 40 - 59 %
approx. 8 - 12 hours
4
green
approx. 60 -79 %
approx. 12 - 16 hours
5
green
approx. 80 - 100 %
approx. 16 - 20 hours
6
5
6
B
8
ADN-W_BA_1212_EN.fm Seite 4 Freitag, 4. April 2014 6:10 18
