2
SPECIFICATIONS
SIZE:
5.57"W x 1.52H x 5.45D
WEIGHT:
1.5 lb
POWER:
9Volt to 15Volt AC or DC at 75ma
INDICATORS:
Front panel LEDs: Power, Rx, & Tx,
KALATEL CONNECTION:
(1) mating 3-pin screw terminal connector
PELCO CONNECTIONS:
(4) mating 3-pin Screw terminal connector
PRODUCT DESCRIPTION
The SCT-1027 is a Kalatel to Pelco control code translator designed to permit control of Pelco
cameras from Kalatel controllers. It receives Kalatel RS-422 commands and re-transmits them as
Pelco RS-422 commands. There are four independent Pelco outputs.
Internal switches are used to configure the operation of the code translator. It will accept Kalatel
Digiplex II or Digiplex III at low or high baud rates. The output can be Pelco "P" or "D" code. For
Pelco receivers that have a maximum address of 32 if configured for "P" code, the Kalatel address
can be converted to one of eight groups of 32 Pelco addresses.
Input and output connections are made with mating screw terminal connectors. Front panel
indicaters show status of power, receive, and transmit.
There is an optional 19" rack mount panel (one rack unit high).
