7
SCT-1027 Ver 1.3
Enabling Kalatel Pre-positions
If the Kalatel controller beeps when [Set] is pressed, the presets are probably disabled. To access
the controller's programming menu, press and hold [Set] for a few seconds until prompted for a
code. Then press [5][7][9][Seq]. The beginning of the programming menu should now be displayed
on the LCD panel. Advance thru the menu until you get to the Preset Enable section.
KTD-405 Keyboard
The KTD-405 keyboard does not have an [A/P] key, for autopan, hold the [Tour] key down for
two seconds until you hear a beep.
Instead of a [Set] key to recall presets, the KTD-405 has a [Find] key.
Unlike previous keyboards where it requires entering a programming menu to store a preset, the
KTD-405 has a [Store] key.
The factory default setting for lowest store preset on KTD-405 keyboards is #58. To change this
to #01, use the supervisor's programming menu. Press and hold the return arrow key until you
are prompted for a programming code. Enter [1][4][7][6][Seq] to access the menu and advance
through the menu to "Lowest user prgmd preset", enter 001, then hold [Seq] down for three
seconds to exit.
