ACCESSORIES
CODE
DESCRIPTION
Z-PC-DINAL1-35
DIN rail support with power supply terminals P = 35 mm
Z-PC-DIN1-35
DIN 1 slot support for rear connector P = 35mm
Z-PC-DINAL2-17.5
Quick fit support for DIN rail - HEAD + 2 SLOT P = 17.5 mm
Z-PC-DIN2-17.5
Quick fit support for DIN rail - 2 SLOT P = 17.5 mm
FD01
Photo detector for pulse counting, max freq. 10 Hz
CONTACT INFORMATION
Technical support
Product information
8/8
LED SIGNALS ON THE FRONT PANEL (Z-4DI-2AI-2DO)
LED
STATUS
MEANING
IP/ PWR (Green)
ON
Module powered and IP address acquired
FAIL (Red)
ON
At least one of the two analogue inputs is out of
scale (underscale-overscale)
ETH TRF (Green)
Flashing
Packet transmission on Ethernet port
ETH LNK (Yellow)
ON
Ethernet port connected
Tx1 (Red)
Flashing
Modbus packet transmission from device to port 1
RTU
Rx1 (Red)
Flashing
Modbus packet transmission to port 1 RTU
Tx2 (Red)
Flashing
Modbus packet transmission from device to port 2
RTU
Rx2 (Red)
Flashing
Modbus packet transmission to port 2 RTU
LED
STATUS
MEANING
PWR (Green)
ON
Module powered
Tx/ RX (Red)
Flashing
Transmission and reception of data on at least
one Modbus port: port 1 RTU, port 2 RTU
DI1, DI2, DI3, DI4 (Red)
On / Off
Status of digital input 1, 2, 3, 4
DO1, DO2 (Red)
On / Off
Status of output 1, 2
FAIL (Red)
Flashing
Outputs in fail condition
LED SIGNALS ON THE FRONT PANEL (ZE-2AI)
