USER MANUAL – Z-GPRS2-SEAL / Z-LOGGER-SEAL
99
Blackout Alert Filter:
Select for how much seconds the main power must continuously be down before the
RTU send an alert of blackout.
Power-ON Event Filter:
Select for how much seconds the main power must continuously be up before the
RTU send an alert of blackout off. Use this function also for send an alert when the RTU is powered on.
Start Condition:
Select the start state and/or the alert mode:
Ignore state:
the alert is activated on condition change state
Entry state:
the alert is activated on state (so there is no need of a change state)
False:
At startup the RTU alert is on False state so if the alert source was True the alert is activated,
otherwise if at startup the alert source was False the alert is activated only at a following alert source
change state.
True:
At startup the RTU alert is on True state so if the alert source was True the alert is activated only at a
following alert source change state, otherwise if at startup the alert source was False the alert is activated.
12.9.
Analog Input Configuration Window
General
This window configure the embedded RTU analog inputs channels.