USER MANUAL – Z-GPRS2-SEAL / Z-LOGGER-SEAL
78
Select the Buad Rate, the parity and the stop bits agree to the connected modbus RTU slaves devices.
Enable Modbus Master Control:
If checked enable the Modbus master poll.
Delay Between Requests:
Select the delay between two register requests.
Request Timeout:
Select how many time to wait before pass to the next register
.
Press
APPLY
to apply changes
.
Now select the serial port is configured and the
symbol is replaced by the
symbol.
Now we can add the slave modules connected to the port, press the right button mouse on the selected
serial port and select Add Module:
Now the slave module configuration window will appear: