ENGLISH 7/8
MI003074-E
Segnalazione tramite LED
Blinking
(RED)
ON
(GREEN)
Blinking
(RED)
STATUS
The module is power on
Data are being transmitted through the
RS485 comm. port
LEDs signallings
ERR
PWR
TX
RX
LED
Segnalazione tramite LED
LEDs signallings
Voltage
V
A
+
Active current (1)
External power supply
current (2)
There is no insulation between RS485 and the analog output.
34
35
35
34
36
36
+
Data are being received through the
RS485 comm. port
At least one of the active phases’ voltage
is less than 40 Vac
ON
(YELLOW)
DIGITAL OUTPUT
The module has a digital output: each pulse corresponds to a given number
of increments about to the energy counter. Imax=V/R=50 mA, Vmax=28V. For more
informations, see the display settings manual.
For detailed information on RS485 serial interface, consult the documentation provided by
the website www.seneca.it, in the section
Prodotti/Serie Z-PC/MODBUS TUTORIAL
.
SERIAL INTERFACE
Digital output
29
30
I
R
V
ANALOG OUTPUT
The module provides a programmable, analog output in voltage (0..10 Vdc) or active and
passive current (0..20 mA). We recommend using shielded cables for the electric
connections.
Segnalazione tramite LED
Segnalazione tramite LED
Programming
The communication parameters have the following default values:: baudrate=38400, no
parity, bit number=8, bit stop=1. These values can be modified by display or Modbus protocol.
To program the device, download the free software Easy Setup from the website
www.seneca.it.
