USER MANUAL – RTU-LP-ST
26
The log can be sent in a report every N minutes (where N is configurable from the Software Easy LP-RTU)
but is sent only if at least one event is happened in the report time.
Note that the log is sent N minutes after the modem switch off.
For example if the log must be sent every 10 minutes we can obtain:
FIRST LOG SENT AT 12:00 -> TIME FOR SEND THE LOG 1 MINUTE -> MODEM SWITCH OFF AT 12:01
SECOND LOG SENT AT 12:01 +10minutes = 12:11 -> TIME FOR SEND THE LOG 1 MINUTE -> MODEM SWITCH
OFF AT 12:12
THIRD LOG SENT AT 12:12 +10minutes =12:22 -> TIME FOR SEND THE LOG 1 MINUTE -> MODEM SWITCH
OFF AT 12:23
…
A single file can contain a maximum of 64 Data Rows so more than one file1 report can be created.
The FTP file name is :
RTUNAMERTUCODE_YYYY-MM-DD_HH-MM_KKKK_File1.csv
Where:
RTUNAME: is the RTU Name configured with Easy RTU-LP Software
RTUCODE: is the numerical RTU code configured with Easy RTU-LP Software
YYYY-MM-DD_HH-MM: it’s the date/hour of the dispatch
KKKK: is a progressive alphanumerical code
File0: is a constant
An example file name is: MRTU10001_2017-05-08_13-48_042C_File1.csv
The File contents is of this type:
DATE
TIME
EVENT
AIN1
AIN2
TOT1
TOT2
TOT3
TOT4
09/05/2017 15.11.56 80000000
0
0
0
0
0
0
09/05/2017 15.11.56 40000000
0
0
0
0
0
0
Where Event can be obtained from the table below:
