OmniHub 16 – User Manual
Page
67
of
112
3.3.11.1
Module Status
Status page for OHE-SDI shows the following parameters: Signal Status, Input Video
Resolution, Output Video Resolution, Video Bitrate, Audio Bitrate, Audio2 Bitrate, Total
Bitrate, Effective Bitrate, TS anaylsis and Program Name. The following parameters will
display values once a good SDI source is connected.
3.3.11.2
Module Basic Settings
The Setting for SDI has Basic and Advanced Parameters. Basic Parameters are the
same with the other Encoder Parameters where we can modify the Video, Audio and
Service Parameters as shown in the picture below.
Advanced parameters will display the list of parameters that you can enable and modify.
Video Parameter
Range
Video Parameter
Range
