OmniHub 16 – User Manual
Page
37
of
112
OHR-DVBS2FTA-00
OHR-DVBS2FTA-00A
OHR-DVBS2FTA has a similar Status interface to OHR-DVBS2CI. Differences between
the 2 modules: 1) the number of received satellite signals (4/8 Satellite). 2) DVBS2CI
can decrypt services using CAM module and Smart Card, while the DVBS2FTA use
BISS decryption.
The parameters for each port in Module Settings are also same with those of the OHR-
DVBS2CI and Service Configuration is same with that of OHR-DVBC-00. Please refer to
page 32 to 34 for the configuration manual.
3.3.5
OHR-8VSB-00
OHR-8VSB-00 is a 4-channel 8VSB receiving module with 4 RF connectors. Picture
below shows the front plate of the 8VSB module.
Module specification:
-
4 RF female connectors
-
Frequency range: 50 – 860MHz
-
Bandwidth: 6MHz
-
Modulation: 8VSB
-
Signal Level: -80dBm ~ -20dBm
3.3.5.1
Module Status
Status page will display when you select the OHR-8VSB-00 in the channel list. This
shows the Channel Number, Locked Status, Total Bit Rate, Effective Bit Rate, TS
Analysis and Service List for each 8VSB input stream. Once the channel is connected to
the source and is set with the correct parameters. The status of the channel will display
‘locked’ and you can see the total bitrate and actual bitrate. Total Bit rate in Mbps shows
the bitrate of receiving signals of each channel with LOCKED status, while the Effective
