OmniHub 16 – User Manual
Page
41
of
112
To use
Bypass
or
multiplex mode on stream level
, click the icon
. When a new
window appears, select the output stream/channel where the stream will be bypassed or
multiplexed.
To use
Multiplexing mode on service level
click on the pencil icon
on the right side
in the line with the proper service. Then select the output stream (channel) where the
service will be multiplexed.
Do not forget to click the Apply button
on the right side to make the change takes
effect.
To clear the whole routing table, click
button.
There is a channel scan button
on top. Normally
the input service list of each channel will show on this page, but when you change the
input source, you should refresh the changed channels manually by selecting the
channel and clicking
Channel Scan
button.
3.3.5.4
Modules System
System
tab allows you to perform the following tasks:
- Import / export license
- Log manages
- Reboot
- Factory Default
