EN - 5
Step 4
Place the nut in the hexagon hole of the
stand, then insert the screw in other side
and then tighten it by the screw driver.
Install the wireless 5-IN-1 sensor in
an open location with no obstructions
above and around the sensor for
accurate rain and wind measurement.
Install the sensor with the smaller end
facing the North to properly orient the
wind direction vane.
Secure the mounting stand and clamps
(included) to a post or pole, and allow
minimum 1.5m off the ground.
MOUNTING GUIDELINES
1. Install the wireless 5-IN-1 sensor at least 1.5m off the ground for better and more
accurate wind measurements.
2. Choose an open area within 150 meters from the LCD console.
3. Install the wireless 5-IN-1 sensor as level as possible to achieve accurate rain and
wind measurements.
4. Mount the wireless 5-IN-1 sensor with the wind meter end pointing to the North to
correctly orient direction of the wind vane.
CONSOLE
BACKUP BATTERY INSTALLATION
1. Remove the battery door on the back side of the console.
2. Insert CR2032 button cell as per the polarity information marked on the battery com-
partment.
3. Replace the battery door.
Add rubber
pads before
mount on
the pole
Point to
NORTH
1.5 meter off
the ground
B. Mounting on
the railing
A. Mounting on pole
(Pole Diameter
1”~1.3”) (25~33mm)
