EN - 4
INSTALLATION
WIRELESS 5-IN-1 SENSOR
Your wireless 5-IN-1 sensor measures wind speed, wind direction, rainfall, temperature and
humidity for you.
It’s fully assembled and calibrated for your easy installation.
BATTERY AND INSTALLATION
Unscrew the battery door at bottom of unit and insert
the batteries according to the +/- polarity indicated.
Screw the battery door compartment on tightly.
NOTE:
3. Ensure the water tight O-ring is properly aligned in
place to ensure water resistant.
4. The red LED will begin flashing every 12 seconds.
ASSEMBLY THE STAND AND POLE
Step 1
Insert the top side of the pole to the square
hole of the weather sensor.
NOTE:
Ensure the pole and sensor’s indicator
align.
Step 2
Place the nut in the hexagon hole on the
sensor, then insert the screw in other side
and tighten it by the screw driver.
Step 3
Insert the other side of the pole to the
square hole of the plastic stand.
NOTE:
Ensure the pole and stand’s indicator align.
