Sencor SPV 7766TD, User Manual

Page: 10 / 172

8 EN
Insert the battery
Insert the battery
1. Open the battery door.
2
1
3
4
5
6
7
8
9
10
11
12
13
20
17
18
19
14
15
16
30
27
28
29
25
22
23
24
33
32
35
34
26
21
MO NI TOR
36
37
38
39
40
41
31
hole
2. Insert two AAA size batteries.
2
1
3
4
5
6
7
8
9
10
11
12
13
20
17
18
19
14
15
16
30
27
28
29
25
22
23
24
33
32
35
34
26
21
MO NI TOR
36
37
38
39
40
41
31
To control the device using the remote control point the remote control
at the device and then press the button with the required function.
The maximum range of the remote control is about 5 meters with
a deviation of up to +/- 30° from the perpendicular direction to the
reception sensor of the remote control on the front side of the device.
The falling capacity of the batteries gradually reduces the remote
control range.
There must be no solid obstacles in the area between the remote
control and the device when the remote control is being used.
During standard use the lifetime of batteries in the remote control
is about 1 year. When the effective ranges of the remote control is
substantially reduced or when there are problems with its use, change
both the batteries in the remote control.
If you will not be using the remote control for a longer period of time,
take out both batteries from it - in this way you will prevent potential
damage caused by their leakage.
Pay special attention to the batteries used as regards to the
environment. The batteries must not be exposed to excessive heat,
such as sun radiation, fi re, etc.
The incorrect use of batteries may cause the leakage of the
electrolyte and corrosion. To ensure that the remote control works
correctly, proceed according to the instructions below:
-
Do not insert the batteries in the wrong direction.
- Do not recharge, heat, open or short the batteries.
- Do not throw batteries into a fi re.
- Do not leave discharged batteries in the remote control.
- Do not combine various types of batteries or new
and old batteries.
- If you are not using the remote control for a longer period of time,
remove the batteries to prevent potential damage caused
by a subsequent battery leakage.
- If the remote control is not working correctly or its operational
range is reduced, change all batteries for new ones.
- If electrolyte leaks out from the batteries, have the remote control
cleaned by an authorised service centre.