Sencor SPV 7766TD, User Manual

Page: 23 / 172

EN 21
Troubleshooting tips
Before calling for service, you can check the following items
on symptoms and solutions.
No sound or distorted sound:
Ensure that the equipment is connected properly.
Ensure that the input settings for the TV and stereo system
are proper.
No picture:
Ensure that the equipment is connected properly.
Ensure that the input setting for the TV is „video“.
Ensure that the LCD is on.
No play:
Condensation has formed : wait about 1 to 2 hours to allow the player
to dry out.
This player can‘t play discs other than DVDs, MP3s and CDs.
The disc may be dirty and require cleaning .
Ensure that the disc is installed with the label side up.
No remote control:
Check the batteries are installed with the correct polarities (+&-).
The batteries are depleted: replace them with new ones.
Point the remote control unit at the remote control sensor
and operate.
Remove the obstacles between the remote control unit
and the remote control sensor.
Operate the remote control unit at a distance of not more
than 8 meters from the remote control sensor.
No key operation(by the unit and/or the remote control)
is effective:
Turn the unit off and then back to on. Alternatively, turn off the unit,
disconnect the AC power cord and the re-connect it. (The player may
not be operating properly due to lightning, static electricity or some
other external factor.)
Battery does not work
Check whether the battery is out of power or in proper connection.
Troubleshooting tips