Sencor SDV 7406H, User Manual

Page: 7 / 146

EN 5
EN
Revision 05/2015 Copyright © 2015, Fast ČR, a. s.
Important safety instructions
CLASS 1
LASER PRODUCT
NOTICE:
THIS DVD PLAYER IS A CLASS 1 LASER PRODUCT. USING CONTROLS, OR
SETUP OR PROCEDURES NOT LISTED IN THIS MANUAL MAY RESULT IN
EXPOSURE OF PEOPLE TO DANGEROUS RADIATION. SINCE THE LASER
BEAM USED IN THIS DEVICE IS HARMFUL TO HUMAN EYESIGHT, DO NOT
TRY DISASSEMBLE THE PLAYER. ALL SERVICE SHOULD BE DONE BY
QUALIFIED PERSONEL.
WARNING
UNDER THE FCC REGULATIONS, ANY CHANGE OR ALTERATION NOT
EXPRESSLY APPROVED BY THE MANUFACTURER OR BY HIS AUTHORIZED
REPRESENTATIVE MAY LEAD TO CANCELLATION OF THE RIGHT OF THE
USER TO USE THE DEVICE.
This device is equipped with anti-copying technology, protected by USA patents and other
rights for the protection of the intellectual property of ROVI. Reverse engineering and
disassembly is prohibited.
Concerning the USB connector:
• USB memory device must be plugged directly into the device.
• Do not use a USB extension cable, it might cause data transfer failure or interference.
Electrostatic discharges may cause malfunction. In this case, the user must restart
the device. The player can play similar types of fi les and formats from the USB
device like from the disc. Before you use USB memory device try its communication
function with the device and the speed of reading data. Remember that reading of
data via external connector can be slower and the fi les with high data fl ow may not
be played correctly.
For maximum reading speed, we recommend to keep the disc space defragmented.
Use fi le system FAT32, single partition, no protection. If the reading of the memory
device is not smooth, it can lead to undesirable effects, such as losing part of the
picture (blocking) or all of it, sound problems and in extreme case stopping the
reading operation. Unexpected behaviour of the memory device or the presence of
viruses or other malware, may cause stopping of functioning of the device and need
to be restarted.
The USB connector is of standard type and cannot supply power to highly powered
USB devices (e. g. hard discs HDD). Use devices with their own power supply and
power them from their own power.
The device was designed for maximum compatibility with memory devices. Due
to the wide range of the devices on the market, it is not possible to guarantee
compatibility with every USB device. In case of diffi culties, try to format the memory
device directly inside the device. If diffi culties persist, use another memory device.
SDV 7406H Sencor EN CZ SK HU PL.indb 5 5.5.2015 11:00:38