Sencor SDV 7406H, User Manual

Page: 17 / 146

EN 15
EN
Revision 05/2015 Copyright © 2015, Fast ČR, a. s.
System setup
6.3.2. DIGITAL AUDIO SETUP
DIGITAL S/PDIF OUT
SPDIF/ OFF:
A digital audio signal will not be available. (Coaxial output off)
SPDIF/RAW: The digital audio signal input will be in raw format (as recorded on the disc,
for external processing).
SPDIF/PCM: The digital audio signal input will be in PCM format (linear audio, if
available).
6.3.3. KARAOKE SETUP
This item is available if the DIGITAL OUT item is set to SPDIF/PCM.
Select the sampling frequency for the digital audio output. The available options are 48
kHz and 96 kHz.
Note:
Some amplifi ers do not support 96kHz sampling, which has an effect on the coaxial
output.
6.3.4. CHANNEL DELAY
This item is used to set the delay of the centre speaker, rear speakers and subwoofer.
The delay is used to compensate the time difference in transmitting audio caused by the
difference in speaker distance from listeners.
Use the arrow keys [

]/[

] to select the centre speaker, subwoofer, left or right 3D
speaker.
Then use the arrow keys [

]/[

] to set the differences in distance.
6.3.5. EQUALIZER
AUDIO MODE
Select the mode that best fi ts your taste ROCK, POP, LIVE, DANCE, TECHNO, CLASSIC
or SOFT, or select NONE if you do not care to omit sound effects.
6.3.6. 3D PROCESSNG
REVERB MODE
Select the mode that best fi ts your taste CONCERT, LIVING ROOM, HALL, BATHROOM,
CAVE, ARENA or CHURCH, or select NORMAL to disable the reverb effect.
6.3.7. DOLBY DIGITAL SETTINGS
DUAL MONO
STEREO:
The player transmits the audio signal of the left and right channel and played
via the left and right front speaker.
L-MONO:
The player only transmits the audio signal of the left channel to the left and
right front speaker.
SDV 7406H Sencor EN CZ SK HU PL.indb 15 5.5.2015 11:00:40