background image

EN 7

EN

Revision 12/2020

Copyright © 2020, Fast ČR, a. s.

Safety Information

9.  Accessories - To avoid any danger, do not use any accessories other than those 

recommended by this set-top-box manufacturer.

10.  Do not expose the appliance to the effects of dripping or spraying water and do not 

place objects filled with a liquid such as vases on the appliance.

 

Attention: Ensure safety when using electric energy. Any equipment or accessories 
powered from the grid and connected to this unit must be marked with a certification 
label on the equipment itself and must not be modified to avoid locking the safety 
features. This will minimize potential risk of electric shock or fire. In case of any 
doubt, please contact a qualified service technician.

11.  Accessories - Do not put this set-top-box on an unstable cart, stand, tripod, console 

or table. Otherwise, your set-top-box might fall on the floor, resulting in a serious 
injury to children, adults or a serious damage to itself. Use this set-top-box only with 
a cart, base, stand, console or table recommended by the manufacturer or supplied 
with the set-top-box. Any mounting of the unit must be carried out according to 
the manufacturer's instructions and the mounting accessories recommended by the 
manufacturer should be used.

11a.  Take care while moving the cart with the set-top-box. Sudden stops, applying 

excessive force and uneven surfaces may lead to the set-top-box damage.

12.  Outdoor aerial grounding - If an outdoor aerial or cable system is connected to 

this set-top-box, it’s necessary that this aerial or cable system should be earthed 
to provide a certain protection against voltage surges and static charge formation. 
Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984 (Section No. 54 
of the Canadian Electrical Code, Part 1) provides instructions on proper grounding of 
the pole and the supporting framework, grounding the connecting lead to the aerial’s 
discharge unit, connecting to the grounding electrodes and grounding electrode 
requirements.

13.  Power lines - The outdoor antenna system should not be located in the vicinity 

of overhead power lines, other electric lighting or power lines or in such locations 
where fall of the antenna system on such power lines or circuits could occur. When 
installing an outdoor antenna system, take extreme care not to touch and/or come 
close to such electric conductors or circuits as this might have lethal consequences. 
As installation of an outdoor aerial could be dangerous, have this task made by 
professional aerial installers.

Using

14.  Cleaning - Prior to cleaning, please disconnect this set-to-box from your power outlet. 

Do not use liquid cleaning agents or cleaning agents in sprays. Use a dampened cloth 
for cleaning.

15.  Objects which could get in touch with dangerous voltage points or “short-circuit” the 

parts may cause fire or electric shock. Avoid spilling any liquid on the set-top-box.

16.  Lightning thunderstorms - For increased protection of this set-top-box during a 

lightning thunderstorm or for longer periods when the device will not be used, 
disconnect the power cord from the power socket and disconnect the antenna or cable 
system. This will protect your set-top-box from lightning and surge damage in the grid. 

Summary of Contents for SDB 521T



































Reviews: