28 EN
EN
Revision 12/2020
Copyright © 2020, Fast ČR, a. s.
Time shift / recording
Time shift / recording
Connecting a Mass Storage Device to the USB port will enable the Time Shift/Record
feature for a broadcast program.
•
Pause the program being broadcast and resume the watching later on (Time Shift
feature).
•
Record the broadcast program.
•
If the Mass Storage Device is out of free space, the broadcast recording operation will
stop.
Note:
For recording or the time-shift feature, please use a USB 2.0 disc.
For the time-shift and recording feature, please use a USB flash disc with a higher
capacity (> 2 GB).
Caution:
to power the HDD, please use a separate power supply. The USB port can
power only USB flash memory devices.
Timeshift
Starting
•
You can launch the Time Shift function in the view mode by pressing the “PAUSE”
button (when the DVR Setting is set to Pause - recommended).
•
Press the “RIGHT” or “LEFT” button to move the cursor to the time you want to
display. Press OK to confirm.
Playback
During the playback, you can perform the following actions:
•
Press “PAUSE” to stop the playback temporarily
•
Press “FORWARD” to fast forward the playback
•
Press “BACKWARD” to backward the playback
To stop the time-shift
To stop the TimeShift feature, press “STOP”.
Note: The time shift is not available during playback.
