8
address of the remote PC.
Password Settings:
To change your password, enter your current password in the “Current Password” box. Enter
new password in the “Password” box. Enter it again in the “Re-type password” box to confirm it.
Click
APPLY
to complete your change.
The “idle Time Out” is the amount of time of inactivity before the Access Point will
automatically close the Administrator session. Set this to zero to disable it.
Remote Management:
By default, management access is only available to users on your local network. However, you
can also manage the Access Point from a remote host. Just check the Enable check box and enter
the IP address of an administrator to this screen.
4.1.3 Firmware
Upgrade
The firmware information is displayed on this page. You can find firmware version and
firmware date here. There are two ways to upgrade the firmware: “Using TFTP” and “Using WEB”.
Click
APPLY
to choose the one you want.
z
Using TFTP
On the managed computer, run the TFTP Server utility. And specify the folder in which the
firmware file resides. After running the TFTP server, enter the TFTP server IP and the filename on
the following page. Click on
APPLY
to complete your change.
