40
2. The “idletime” action can change the system idle time out.
Usage: sysSet idletime [idle time(min)]
3. The “remote” action can enable or disable the remote management function. You can enter
the IP address of the remote manager.
Usage: sysSet remote [0|1] [IP of remote manager]
0: disable
1: enable
Example:
4.
The ”fwupgrade” action can do the firmware upgrade.
Usage: sysSet fwupgrade [IP] [file]
Example:
cmd>sysSet idletime 98
New Idle time value out is 98 min(s)
(Please remember to reset the Access Point if you made any change).
cmd>
cmd>sysSet remote
Current Remote Management status: Disabled
cmd>sysSet remote 1 192.168.3.25
New Remote Management status: Enabled
(Please remember to reset the Access Point if you made any change).
cmd>
Welcome to Telnet Daemon v1.01
cmd>sysSet fwupgrade 192.168.3.20 application.dlf
Current Firmware Version: 1.00.4431
Firmware Date: 2003.01.02
TFTP download start
TFTP download successed
(Please remember to reset the Access Point if you made any change).
