32
5.3
Configuring Wireless LAN through Telnet
The command “wlanSet” can configure the Wireless LAN part. Type “wlanSet” and the action
you want to perform. You need to know actions for the Wireless LAN setting.
Usage: wlanSet [ACTION] [arg1] [arg2] ….
ACTION
Description
Usage
ssid
Change the SSID
wlanSet ssid [SSID]
channel
Change the wireless
channel[1-14]
wlanSet channel [channel
number]
frag
Change the fragment
Threshold
wlanSet frag [fragment
threshold]
rts
Change the RTS Threshold wlanSet rts [RTSThreshold]
keyid
Change the WEP default
key id [1-4]
wlanSet keyid [defualt key
id]
beacon
Change the beacon Period
[0-4095ms]
wlanSet beacon [beacon
period]
maxass
Change the max associated
stations [1-300]
wlanSet maxass [number of
stations]
wepkey
Change the WEP key
wlanSet wepkey [keyid]
[key(hex format)]
wep
wlanSet wep [0|64|128]
wlanSet wep [0|64|128]
isolate
Change the Wireless Client
Isolation: 0:disable,
1:enable
wlanSet isloate [0|1]
hidessid
Change the Hide SSID:
0:disable, 1:enable
wlanSet hidessid [0|1]
block
Change the Block Responds
to 'Unspecified-SSID':
0:disable, 1:enable
wlanSet block [0|1]
power
Change the Outpower level:
0:Original, 1: 100mW, 2:
50mW, 3: 20mW
wlanSet power [0|1|2|3]
aplink
Change the AP Link
Completeness: 0:disable,
1:enable
wlanSet aplink [0|1]
authalgo
Change Authentication
wlanSet authalgo [1|2|3]
