36
12.
The “block” action can enable/disable the ”Block responds to Unspecified-SSID” function.
0: Disable
1: Enable
Usage: wlanSet block [0|1]
13.
The “power” action can change the power level 0:Original, 1: 100mW, 2: 50mW, 3: 20mW
0:Original
1: 100mW
2: 50mW
3: 20mW
Usage: wlanSet power [0|1|2|3]
If plug off the cable of LAN interface,
14. The “aplink” action can change the AP Link Completeness. If enable this function, the WLAN
interface will be disabled when plug off the cable of LAN interface,
0: Disable
1: Enable
Usage: wlanSet aplink [0|1]
cmd>wlanSet block 0
Old Block Responds to 'Unspecified-SSID': Enable
New Block Responds to 'Unspecified-SSID' (after reset): Disable
(Please remember to reset the Access Point if you made any change).
cmd>wlanSet power 2
Old Power Level: MAX(original)
New Power Level (after reset): 50mW
(Please remember to reset the Access Point if you made any change).
cmd>wlanSet aplink 1
Old AP Link Completeness: Disable
New AP Link Completeness (after reset): Enable
(Please remember to reset the Access Point if you made any change).
